{"product_id":"embroidery-hoop-stand-beechwood-sit-on-lap-table","title":"Beechwood Embroidery Hoop Stand - Sit-On Lap and Table Stand with 360 Degree Rotation","description":"\u003cdiv style=\"text-align: center;\"\u003e\u003cvideo height=\"325\" width=\"325\" class=\"dh-video-desc\" controls=\"controls\" loop=\"loop\" autoplay=\"autoplay\" muted=\"muted\" preload=\"metadata\" playsinline=\"playsinline\"\u003e\n\u003csource src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/2da22cdcf8fa40a9974d04850774ec1b.mp4\"\u003e\u003c\/video\u003e\u003c\/div\u003e\n\u003cp\u003eAn hour of hand embroidery should not leave your hands and shoulders aching. This beechwood embroidery hoop stand takes the weight of the hoop off your hands, so you can stitch with both of them — one above the fabric, one below — and keep going for as long as the light lasts.\u003c\/p\u003e\n\u003cp\u003eIt works two ways from the same base. Set it on a table and it is a tabletop embroidery stand. Lay the base flat on your chair, sit on the wide end, and it becomes a sit-on lap stand: your own weight holds it steady, so you can stitch in an armchair or on the sofa with no desk and nothing clamped to the furniture. The hoop is held by a wooden thumb screw that grips the rim, which means it takes the ordinary wooden hoops you already own rather than a hoop of its own.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e natural beech wood, polished and finished, with metal fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e 46 x 23 cm (18.11 x 9.05 in), contoured along one edge so it tucks under your thigh when you sit on it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e adjustable up to 67 cm (26.5 in) above the base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms:\u003c\/strong\u003e four jointed, rotating arms — height, reach and angle all adjust independently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotation:\u003c\/strong\u003e 360 degrees at the base swivel and 360 degrees at the hoop clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoop clamp:\u003c\/strong\u003e wooden thumb screw that tightens onto the rim of the hoop, and takes a rim up to 2.5 cm (1 in) thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase underside:\u003c\/strong\u003e non-slip foot, so it stays put on a polished table\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e folds flat, no tools needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e 1 x embroidery hoop stand, 1 x magnetic needle minder, 1 x instruction sheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoop:\u003c\/strong\u003e not included — the stand is made to hold the hoops already in your basket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0514\/1082\/9474\/files\/4_6937e924-c898-41f3-bd43-47d2af7f85d3.jpg?v=1726316415\" alt=\"Measurement diagram of the beechwood embroidery hoop stand showing the height adjusting up to 67 cm \/ 26.5 in and the base measuring 46 cm \/ 18.11 in long by 23 cm \/ 9.05 in wide\" width=\"420\" height=\"420\"\u003e\u003c\/div\u003e\n\u003ch2\u003eHow It Works\u003c\/h2\u003e\n\u003cp\u003eSlide the rim of your hoop into the slot in the clamp at the top of the arm and turn the wooden thumb screw until it grips. The slot takes a rim up to 2.5 cm (1 in) thick, which covers standard wooden hoops with room to spare. That is the whole setup — no adaptor, no proprietary fitting, no tools. Because the clamp closes on the hoop's edge rather than on a mount built into it, it accepts ordinary wooden embroidery hoops in the sizes you already have.\u003c\/p\u003e\n\u003cp\u003eThe four arms fold and unfold like a desk lamp, so you set the height, how far the work sits from your body, and the tilt of the hoop, all independently. Once the joints are snugged up they hold their position while you pull thread through, instead of drooping and making you brace against them.\u003c\/p\u003e\n\u003cp\u003eBoth ends turn a full circle. The clamp rotates 360 degrees, so you can flip the hoop face-down to bury a thread end or start a new one and then turn it straight back — without unclamping and re-tensioning. The base swivels 360 degrees, so you can move the whole piece toward the window without moving the stand.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0514\/1082\/9474\/files\/10_1490cec0-4738-4f1f-8b53-863136d6be38.jpg?v=1726316415\" alt=\"Close-up of the beechwood embroidery hoop stand folded flat, showing the wooden thumb screw hoop clamp and the jointed arms collapsed onto the contoured base\" width=\"420\" height=\"420\"\u003e\u003c\/div\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eIt suits anyone who stitches for longer than their hands comfortably allow: hand embroidery, cross stitch, needlepoint and punch needle all work the same way, because all four hold the fabric in a hoop. It is particularly worth having if you stitch away from a desk — in an armchair, on the sofa, in a hospital chair, on a car journey — since the sit-on base means you are not looking for a table edge to clamp to.\u003c\/p\u003e\n\u003cp\u003eIt is also a sensible gift for a stitcher who already has hoops, precisely because it does not force them to switch to a new hoop system.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0514\/1082\/9474\/files\/8_372dc13a-9c18-448b-8530-5837f0375db2.jpg?v=1726316415\" alt=\"A seated stitcher using the embroidery hoop stand as a sit-on lap stand, with the wooden base laid on the chair beneath her leg and the arm rising between her knees to hold the hoop at chest height\" width=\"420\" height=\"420\"\u003e\u003c\/div\u003e\n\u003ch2\u003eHow This Compares\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAgainst lap and seat stands built around their own hoop:\u003c\/strong\u003e many sit-on stands come with a fitted hoop and only really work with that hoop, which means your existing collection sits in a drawer. This one clamps the hoop by its rim, so you can swap between the hoop sizes you already own without changing anything on the stand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAgainst stands that hold the hoop with a spring clip:\u003c\/strong\u003e a thumb screw tightens as far as you turn it and stays there. It is the difference between a hoop that holds its angle while you pull a stitch through and one that creeps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAgainst a floor stand:\u003c\/strong\u003e a floor stand gives you more reach, and it also needs permanent floor space beside your chair, plus a separate head bought to match your frame. This folds flat and goes in a drawer between sessions, and works on a table as well as on your lap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAgainst a table-only stand:\u003c\/strong\u003e the same stand does both jobs. You are not choosing between stitching at the dining table and stitching in the armchair.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0514\/1082\/9474\/files\/9_dc299a96-9a09-4a5d-b436-c58c77e281e5.jpg?v=1726316415\" alt=\"Four views of the beechwood embroidery hoop stand set to different heights and hoop angles, from low and upright to fully extended and tilted forward\" width=\"420\" height=\"420\"\u003e\u003c\/div\u003e\n\u003ch2\u003eSizing, Materials \u0026amp; Care\u003c\/h2\u003e\n\u003cp\u003eThe frame is natural beech, chosen for needlework stands because it is dense enough not to flex under tension and takes a smooth finish that will not catch fine thread or silk. Every surface is polished, and the joints are finished to resist the splitting and warping that softwood stands develop after a season or two.\u003c\/p\u003e\n\u003cp\u003eWipe it with a dry or barely damp cloth and keep it out of standing water — it is unfinished-look natural wood, not a sealed outdoor timber. If a joint starts to move under load after heavy use, turn its thumb screw a little tighter; nothing needs glue or replacing. Fold it flat to store it, and it will sit under a sofa or in a project bag.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need an embroidery stand?\u003c\/strong\u003e\u003cbr\u003e\nIf you stitch for more than half an hour at a time, it changes the session. Holding a hoop means one hand is permanently occupied and your shoulder is doing static work the whole time; a stand frees both hands so you can pass the needle down with one and receive it with the other, which is faster as well as more comfortable. Stitchers who take up a stand usually report they can work longer before stopping. We go into the why at length in \u003ca href=\"\/blogs\/craft-tips\/embroidery-hoop-stand-neck-hand-pain-fix\"\u003eWhy Your Neck and Hands Hurt After Embroidery\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich hoops does it fit?\u003c\/strong\u003e\u003cbr\u003e\nThe wooden embroidery hoops you already own. The clamp grips the hoop by its rim rather than by a fitting built into the hoop, and it opens to take a rim up to 2.5 cm (1 in) thick — comfortably more than a standard wooden hoop needs. Swapping between the hoops you own is a matter of loosening the thumb screw and changing them over. It is sold as the stand alone, so you are not paying again for hoops you have.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the most popular embroidery hoop size?\u003c\/strong\u003e\u003cbr\u003e\nSix and eight inch hoops are the everyday sizes most stitchers reach for. Because this stand clamps the rim rather than fitting a hoop of its own, changing size means loosening the thumb screw and swapping the hoop over — you are not committed to one size for the life of the stand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes a good stand for embroidery hoops?\u003c\/strong\u003e\u003cbr\u003e\nFour things, in order: a clamp that genuinely grips rather than pinches; independent adjustment of height, reach and angle so you bring the work to your body instead of leaning into it; joints that hold their setting under thread tension; and a base that suits where you actually stitch. This stand answers all four with a thumb-screw clamp, four jointed arms, 360 degree rotation at both ends, and a base that works on a table or under you on a chair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it away from a table?\u003c\/strong\u003e\u003cbr\u003e\nYes — that is what the flat base is for. Lay it on your chair or sofa seat, sit on the wide end, and your weight anchors it. The contoured edge sits against your leg rather than under it. On a table, the same base sits on its non-slip foot and needs no clamping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow high does it go?\u003c\/strong\u003e\u003cbr\u003e\nUp to 67 cm (26.5 in) above the base, and it adjusts continuously below that, so you can bring the hoop to eye level at a table or set it low and close when you are sitting on it. The four jointed arms let you change the reach and the tilt without changing the height.\u003c\/p\u003e\n\u003cp\u003eSet it up once, and the next hour of stitching belongs to your hands rather than to holding the hoop.\u003c\/p\u003e","brand":"I Sew Need It Crafts","offers":[{"title":"Highly Adjustable Beechwood Embroidery Hoop Stand","offer_id":44339463454975,"sku":"CJJT179953301AZ","price":59.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0514\/1082\/9474\/files\/1_b377b95c-a9ff-4a1a-a376-73304ce41e7c.jpg?v=1726316416","url":"https:\/\/www.isewneeditcrafts.com\/products\/embroidery-hoop-stand-beechwood-sit-on-lap-table","provider":"I Sew Need It Crafts","version":"1.0","type":"link"}